Design of a Virtual Model with LabVIEW to simulate the behavior of a Synchronous Electrical Machine

Authors

  • Alfonso Quispe Perez Universidad Ricardo Palma, Lima, Perú.
  • Anderson Minaya Ticona Universidad Ricardo Palma, Lima, Perú.
  • Juan Vela Gamboa Universidad Ricardo Palma, Lima Perú.
  • Kevin Lozano Rodríguez Universidad Ricardo Palma, Lima, Perú.
  • Luis Huamani Lagos Universidad Ricardo Palma, Lima, Perú.
  • Margarita Murillo Manrique Universidad Ricardo Palma, Lima, Perú.

DOI:

https://doi.org/10.31381/perfilesingenieria.v19i19.5794

Keywords:

Synchronous Machine, Virtual Model , LabVIEW, Electrical Variables

Abstract

The research was developed with the purpose of proposing a virtual design that allows the control and measurement of the electrical variables of a synchronous machine, in this case a Permanent Magnet Synchronous Motor (PMSM). The objective was to demonstrate the behavior in real time of the engine, taking into account the parameters of the manufacturer and the standards. The design was carried out with the LabVIEW development software, obtaining as a result a didactic interface, in which it was possible for the student to interact and understand the behavior of the main parameters of a synchronous motor. The simulation results correspond to three different cases, obtained from the variation of the motor parameters, demonstrating the appropriate behavior according to the plate data for each of the cases. In case 1, the stator inductance values are in the order of 0.002 and the stator resistance equal to 0.01, complying with the plate data, the other cases show slight variations.  The conclusions of the investigation determined that the Field Oriented Control (FOC) technique used to control the PMSM works correctly, as well as the entry and simulation of various parameters of the PMSM.

Downloads

Download data is not yet available.

References

Design Simulation an Implementation of a PMSM Drive System”, David Vindel, Suecia, 2011 [En línea]. Disponible en: https://earchivo.uc3m.es/bitstream/handle/10016/12826/Resumen_PFC_%20.

Controlador de acción proporcional e integral (PI) - Educativa Catedu”, 2021 [En línea]. Disponible en: http://educativa.catedu.es/44700165/aula/archivos/repositorio/4750/4926/html/13_c ontrolador_de_accin_proporcional_e_integral_pi.html.

Análisis de elementos finitos (FEA) - SIEMENS AG”, Alemania, 2021 [En línea]. Disponible en: https://www.plm.automation.siemens.com/global/es/our-story/glossary/finite-element-analysis-fea/13173

E. Julián, A. Almidón, “Manual de programación LabVIEW 9.0”, Asociación de apoyo a la investigación, innovación y transferencia tecnológica - Green Energy, Perú, 2018.

Control de velocidad de un motor síncrono de imanes permanentes accionado por un inversor trifásico multinivel - Universidad Politécnica Salesiana”, Rosalindo Mayoral, José Juárez, Beatriz Agilar, Jesús Linares y Jorge Barahona, Ecuador, 2019 [En línea]. Disponible en: https://www.redalyc.org/journal/5055/505561581013/html/

Motor Síncrono de Imán Permanente”, Farnell Company [Internet]. Disponible en: Motor Control Permanent Magnet Sync Motor (PMSM) | Farnell

Advanced Inverter Model ”, 2017 [Internet]. Disponible en:

https://forums.ni.com/t5/NILabsToolkits/Advanced-Inverter-Model-for-NI-Electric-Motor-SimulationToolkit/ta-p/3522236?profile.language=es

Control directo al par y Control de Campo Orientado para un Motor Síncrono de Imanes Permanentes”, Universidad Distrital Francisco José de Caldas, 2019 [Internet]. Disponible en: Control Directo al Par y Control de Campo Orientado para un Motor Síncrono de Imanes Permanentes | Ingeniería (udistrital.edu.co)

Downloads

Published

2023-06-30

How to Cite

Quispe Perez, A. ., Minaya Ticona, A. ., Vela Gamboa, J., Lozano Rodríguez, K., Huamani Lagos, L. ., & Murillo Manrique, M. (2023). Design of a Virtual Model with LabVIEW to simulate the behavior of a Synchronous Electrical Machine . Engineering Profiles, 19(19), 121–133. https://doi.org/10.31381/perfilesingenieria.v19i19.5794

Issue

Vol. 19 No. 19 (2023): Perfiles de Ingeniería (enero-junio) 2023

Section

Ingeniería Electrónica

License

Copyright (c) 2023 Perfiles de Ingeniería

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

In the event that the manuscript is approved for its next publication, the authors retain the copyright and assign to the journal the right of publication, edition, reproduction, distribution, exhibition and communication in the country of origin, as well as in the abroad, through print and electronic media in different databases. Therefore, it is established that after the publication of the articles, the authors may make other types of independent or additional agreements for the non-exclusive dissemination of the version of the article published in this journal (publication in books or institutional repositories), provided that it is explicitly indicated that the work has been published for the first time in this journal. 

To record this procedure, the author must complete the following forms:

  • Format 1 - Author information.
  • Format 2 - Affidavit of originality and authorization for the publication of articles.
  • Format 3 - Compliance with open science.